[Close] 

General Engineer

Videos
Duties
HelpDuties Summary
The selectees of this position will serve as a GENERAL ENGINEER within the HQ of NAVAL SEA SYSTEMS COMMAND, located in Washington, D.C.; Groton, CT; Panama City, FL; Indian Head, MD; Pascagoula, MS; Morristown, NJ; Dahlgren, VA; Wallops Island, VA; Bath, ME; Portsmouth, VA; Philadelphia, PA; Newport News, VA; Norfolk, VA; Arlington, VA, or San Diego, CA.
Learn more about this agency
Responsibilities
You will be planning, managing, and coordinating various engineering development programs or projects that involve continuous systems modification, system requirement evaluation, and other pertinent factor/system performance analysis.
You will be advising organizational staff about state-of-the-art equipment for incorporation into existing systems and equipment; Participating with top management officials in persuading users to accept new systems or equipment.
You will be providing direction for systems design, hardware, software integration systems, software engineering processes, internal/external interface management, configuration management and Integrated Logistics Support (ILS).
You will be trouble-shooting, analyzing, and determining operating problems, and recommending appropriate changes to correct deficiencies; Defining and negotiating analysis results with opposing engineers and managers.
You will be defining project goals, developing plans, schedules, cost estimates, resource requirements, and resulting budgets to achieve established program goals and objectives on schedule and within fiscal constraints.
Travel Required
Occasional travel - You may be expected to travel for this position.
Supervisory status
No
Promotion Potential
3
Job family (Series)
0801 General Engineering
Similar jobs
Engineers, Ship
Ship Engineers
Requirements
HelpRequirements Conditions of Employment
Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.
All qualifications and requirements must be met by the closing date of this announcement.
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field Engineering, Level III. Certification is required within 24 months of appointment.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
This position may be a designated Critical Acquisition Position (CAP). You must be a member of the Acquisition Corps, become a member, or obtain a waiver at the time of selection and sign a three-year tenure agreement prior to assuming the position.
You may be required to successfully complete a pre-appointment physical examination.
Successful completion of a pre-employment drug test (including marijuana) may be required. A tentative offer of employment may be rescinded if you fail to report to the drug test appointment or pass the test. You may be subject to random testing.
Positions filled may require Top Secret, Top Secret (SCI), you will be notified at the time of selection the security requirement.
Qualifications
Your resume must demonstrate at least one year of specialized experience at or equivalent to the next lower pay band NH-02 (GS-11 equivalent) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a Professional Engineer Leading system engineering projects for ship or submarine weapon systems.
Additional qualification information can be found from the following Office of Personnel Management website: Professional and Scientific Positions Group Qualifications Standards: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND
Individual Occupational Requirements for All Professional Engineering Positions: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.



Don't Be Fooled

The fraudster will send a check to the victim who has accepted a job. The check can be for multiple reasons such as signing bonus, supplies, etc. The victim will be instructed to deposit the check and use the money for any of these reasons and then instructed to send the remaining funds to the fraudster. The check will bounce and the victim is left responsible.

More Jobs

General Manager - Salary
Bangor, ME Pizza Hut
General Manager - Salary
Ellsworth, ME Pizza Hut
General Manager - Salary
Augusta, ME Pizza Hut
General Manager - Salary
Houlton, ME Pizza Hut
General Manager - Salary
Rockland, ME Pizza Hut